When you start Microsoft Windows computer

Kernel32.dll corruption errors or Invalid Page Fault in this file may prevent your system to boot. This behavior makes your Windows system unbootable and thus your critical files can not be accessed from your Windows system. It results into File Loss and needs File Recovery to be fixed.

While starting your Windows computer or while opening an application, you may encounter any of the following error messages which indicates Invalid Page Fault in Kernel32.dll file:

1. "Explorer caused an invalid page fault in module Kernel32.DLL"
2. "Commgr32 caused an invalid page fault in module Kernel32.dll"
3. "Error in Kernel32.dll"
4. "[PROGRAM NAME] has caused an error in Kernel32.dll"

The Kernel32.dll is a 32-bit DLL (Dynamic Link Library) file which handles memory management, interrupts and input/output operations in Windows. When you start Windows computer, Kernel32.dll is loaded into the protected memory area so that other applications/programs don?t take over that space.

Causes of Invalid Page Fault in Kernel32.dll file

There are several possible causes of this behavior of Windows operating system and Kernel32.dll file. Some major reasons are as follows:

1. Damaged File Allocation Table
2. Corrupted or incorrect version of Kernel32.dll file
3.Damaged Windows registry
4.Third party application which is corrupted or improperly installed
5.Damage to .CPL (Control Panel) file
6.Damaged .LOG files
7.Damaged or incompatible DLL files
8.Virus infection

If this problem occurs due to any of the above mentioned reasons, you can not access your critical data from Windows hard drive.

Resolution

You can sort out this problem using any of the following methods:

1.Reinstall the application if the error is occurring in a single application
2. Run virus scan to detect and remove viruses
3. Perform repair installation of Windows
4. If all else fail, perform Clean Installation of Windows

Although, reinstalling Windows can help you in solving most of the Kernel32.dll errors but it also has a downside. It requires hard drive formatting that removes all your files from hard drive and put you in need of File Recovery.

It is best possible using third party software, known as File Recovery Software. These software are capable of thoroughly scanning entire hard drive and extracting all the data from it.

Stellar Phoenix Windows Data Recovery is a robust tool that can recover all types of file in most of the file loss cases. It supports recovery from FAT16, FAT32, VFAT, NTFS and NTFS5 file system partitions. This File Recovery Software is compatible with Microsoft Windows Vista, 2003, XP and 2000.

Windows Safe Mode?

Since the first versions of Microsoft Windows 3.x which was released 22 years ago on May 22, 1990, there has been a safe mode that the users can access when their computers are malfunctioning. A safe mode is a diagnostics mode that is supported on almost all modern operating systems such as, Microsoft Windows, Apple Mac OS X, Linux, *BSD and *nix. The safe mode is meant to allow the user to access the operating system by loading minimal amounts of drivers and background services when the operating system otherwise cannot boot normally. The safe mode of Microsoft Windows can help the users in fixing a erroneous driver or a program that they may have installed on accident, or fixing a malfunctioning hardware that is preventing the operating system from booting up normally.

Throughout the years, Microsoft has more or less used the same method to access the Microsoft Windows Safe Mode which is to press the F8 button upon starting/booting the computer. This approach has worked for Microsoft Windows 95, Microsoft Windows 98, Microsoft Windows 98SE, Microsoft Windows Millennium, Microsoft Windows XP, Microsoft Windows Vista and Microsoft Windows 7 (excluding the server versions which all also supported the F8 approach).

However, with the launch of the Microsoft Windows 8, for some reason, Microsoft has hidden away the function to allow a user to boot up in Safe Mode to fix potential problems in the operating system. This article aims to describe 5 easy ways for users of Microsoft Windows 8 to access the safe mode that Microsoft obviously do not want the average users to find.How to boot into Windows 8 Safe Mode - Method I:

This method is probably the most useful one for users with a malfunctioning Windows 8 installation that does not boot normally. Even though Microsoft has disabled the simple F8 approach, the trick now is to actually hold down the Shift button while hitting the F8 key repeatably during boot up. Notice though that this approach may require several tries as Microsoft Windows 8 boots up very quickly and will spend very little time waiting for the user to give the Shift + F8 command. When the user succeeds, the user should enter the Recovery Mode menu. The procedure is outlines below:

1. Start up your computer and already from the beginning hold down the Shift key on your keyboard.

2. Repeatably and quickly smash the F8 key during the whole booting process. If you are "lucky" this will take you into the Recovery Mode menu before the operating system begins to load.

3. In the Recovery Mode menu, select See advanced repair options.

4. Choose the Troubleshoot option.

5. Select the Advanced options button.

6. Select the Windows Startup Settings button.

7. Click the Restart button.

After the the computer restarts, you should be greeted by the old and familiar Advanced Boot Options menu that enables you to boot your Windows 8 in Safe Mode, Safe Mode with Networking and Safe Mode with Command Prompt.How to boot into Windows 8 Safe Mode - Method II:

This approach assumes that you can enter and boot up Microsoft Windows 8 normally as it will use the new Charm Bar in Microsoft Windows 8.

1. Bring up the Charm Bar by either pressing the Win + I keys or swiping your mouse across the right side of the screen.

2. When the Charm Bar pops up, click on the Change PC Settings button at the bottom right.

3. Select General and click the Restart now button under the Advanced startup title.

When the computer restarts now you should enter the Safe Mode of Microsoft Windows 8.How to boot into Windows 8 Safe Mode - Method III:

Similar to the previous method to enter the Safe Mode, this method also requires the user to be able to boot into Microsoft Windows 8 normally. For this method we will once again utilize the Charm Bar in Microsoft Windows 8.

1. Bring up the Charm Bar by either pressing the Win + I keys or swiping your mouse across the right side of the screen.

2. Click the Power button once.

3. Hold down your Shift key and click the Restart icon.

That is all you have to do for this method. When the computer restarts you should be greeted by the Advanced Boot Options menu that will allow you to access the Safe Mode of Microsoft Windows 8.How to boot into Windows 8 Safe Mode - Method IV:

In this method, we will use the command line to tell Microsoft Windows 8 to reboot into Safe Mode. Obviously, this method also requires the user to be able to enter Windows 8 through a normal boot.

1. Press the Win + R key to enter the Run dialogue.

2. Type in the command: shutdown /o /r

3. Press Enter.

After pressing Enter the computer should start the reboot process. Once it boots up again, the user will be able to access the Microsoft Windows 8 Safe Mode environment through the Advanced Boot Options menu.How to boot into Windows 8 Safe Mode - Method V:

This final method will use the msconfig configuration tool that has been around Microsoft Windows versions for many years. In order to access the msconfig configuration tool, the user will once again have to be able to boot into Microsoft Windows 8.

1. Press Win + R to bring up the Windows Run dialogue.

2. Type msconfig into the input bar and hit Enter.

3. In the msconfig System Configuration Window go to the Boot tab found at the top.

4. Check Safe boot under the Boot options title.

5. There will be some additional options available to check with Minimal being the regular Microsoft Windows 8 Safe Mode, Alternate shell being Safe Mode with command prompt, and Network being Safe Mode with networking.

6. Click OK which will bring up a dialogue asking the user if a restart should be performed.

7. Click Restart.

This will restart Microsoft Windows 8. Once the system boots up again it will enter Microsoft Windows 8 using the Safe Mode environment that the user chose in the above steps.Summary of the Safe Mode in Microsoft Windows 8

To be honest, it is very unclear what the intentions from Microsoft were to make it so tedious to boot up Microsoft Windows 8 in Safe Mode. While some of the methods outlined above are simple if you know how to execute them, the fact remains that many people who needs to access the Safe Mode cannot boot up Microsoft Windows 8 normally in the first place, therefore, most of the above methods described are simply not applicable.

The reasons to remove the traditional F8 approach to enter Safe Mode will probably never be completely clear. Microsoft Windows 8 does come with a function that will force it to show the Advanced Boot Options menu if the system fails to boot up normally after several attempts. But it would have been much better to not treat its users like idiots and still keep the regular F8 approach, that we are all so familiar with, instead of the new Shift + F8 approach that makes little sense.

Windows 7 Vps to Web Hosting

If you're looking for the dedicated web hosting hosting server, the vps is the best substitute for take. The reason being this dedicated host offer an effective server when it comes to expenses. It may also have a more personalized support. These types of host has the capacity to handle virtually any hosting than a consumer might need. A real host because virtual devoted
is able to separated into numerous machines that perform the duties of any dedicated host. It is because it has the chance to help make each split-up machine to function on the device that is definitely committed to it. In addition, this kind of server is within 2 types, the windows 7 Virtual private server web hosting along with the Linux Virtual private server web hosting service.

With windows xp virtual private server it involves the ability of getting extremely dedicated servers split into more
. Windows VPS is economical as it might help you run customized server applications in an environment that is isolated. As a result, you may run multiple microsoft windows hosting in isolation of assets. Furthermore, it can allow you instance of remote use of your own computer's desktop. The advantages of this can be you can run the appliance with great ease.

Another advantage is microsoft windows Virtual private server web hosting enables you ensure you are employing your machine to the maximum. Additionally, it should make it friendlier towards the conditions because doing so doesn't use very much electricity. Moreover, it can also awesome itself efficiently than the majority of bodily servers.

There are other reasons why it's great to use a microsoft windows Vps. One of many advantages of this sort of internet hosting machine is that it's affordable. It is possible to therefore relax knowing of top quality with a less expensive price. It is also feasible for getting root access to every client considering the such a program. This has been only possible with committed machine. However, these days it is possible to utilize windows vps every single child entry individual customers' better.

There are lots of other possibilities that your type of virtual private server allows you to do. With a good basic having access to the host you could be competent to install programs. You'll be able to use any type of application that you want on your server with not a large amount of problems.

While using invention of an microsoft windows vps is able to upgrade his/her machine without notice. This is due to each hosting server grows while using the usage placed on it, so it is a less expensive technique to improve your web site based on the demands which are place on it or that you have as well as traffic you think your blog can pull for it. Which means that you'll be able to improve the microsoft windows web hosting within a few minutes and never having to install everthing else.

User Account control in Microsoft

Starting with the rollout of Microsoft Windows Vista, User Account Control has been the source of many complaints aimed at Microsoft’s newest Operating Systems. With Windows 7 and Server 2008R2 Microsoft has enhanced UAC considerably, making it more user friendly and configurable, but do you still want to keep it on? In this article I will discuss the reasoning behind UAC, how it works (without getting technical), and what you can do for your own Windows Systems. TIP – to quickly gain access to the UAC control panel simply type UAC in the search box.Why the need for UAC?

Back in the ‘Ol days (Windows 95, 98, ME, etc), there was no concept of different privileged user accounts. Every user was granted an admin by default. In fact, most or all of the programs that ran with your Windows system also HAD to run with admin privileges, or they wouldn’t work. The problem with that was that every program running while you were logged on, (every Java app, every flash component, etc) also ran with admin rights and without barriers. Think of the modern internet, almost every page has live, streaming, animated content that is written with multiple languages and code; Languages and code that must be interpreted and downloaded by your web browser. It is within some of this very code that spyware and malware hides. TIP – Java, flash, and adobe updates are almost always security patches, and important to keep up to date. (Even more important than Windows updates if you look at the statistics). With Windows NT came seperate user accounts, but users would log in with restricted permissions, and the applications\processes that ran could still "elevate" themselves (or be elevated) and influence the system at other levels. This is why UAC came about, to help restrict applications and processes unless specifically consented for by an administrator.Tokens

In Windows Vista, Windows 7, and Server 2008R2 separate user accounts are used and privileges are handed out in the form of “tokens”. (Don’t make it hard, just visualize a subway token).

When a standard user logs in they are granted a “token” with restricted access. “Restricted” meaning they cannot make changes that will affect the entire Operating System. When an administrator logs in, the user is granted two separate tokens for that session, one restricted token and one unrestricted admin token. While the Admin is logged in applications are started under the restricted user token and only elevated after the user is alerted and gives consent (“Run as Administrator”).Surf as a USER not an ADMIN

One of the best ways to help keep your PC clean is by simply logging on and running your daily tasks as a user and not as an admin, especially when you are surfing the internet. As HubPage writers our research can sometimes take us to the far ends of the internet. We are almost always on new pages, sites, forums, social networks, and blogs. My advice is to do this while logged in as a user. Need to install a program? That’s when you can log into your admin account. You can read more about the UAC settings here. NOTE -- not all malware needs admin privileges, some will go for the user profile, which is why you should clean your PC on a regular basis.There are many opinions on the validity of UAC. The bottom line is that no system protection is flawless, but the combination of a good antivirus package, Windows Firewall, routine cleaning and UAC can be quite effective. My advice is to turn UAC up until it bothers you, then turn it down a notch. If you can stand to keep it all the way up then do it. The middle two options will suffice but don't turn it off completely. One of the smartest things you can do is to surf the internet as a user, not an admin. Clean your PC as often as you remember too and you'll be good to go. Some of my other blogs include:

Ten Best Windows 7 Command Line Commands to get you Started

Start Using XCOPY to save time transferring Files

10 Ways to LOOK Smarter than any of your Coworkers

Windows 7 List of God Modes

Windows 7 comes with a lot of secret shortcuts for developers. Note, these shortcuts are not intended for normal users or for other operating systems other than Windows 7. There have been reports of instant and endless BSOD on Vista 64.

Try these at your your own risk. I take no responsibility to what happens when you try these on your computer ;)

Step 1: Right click.

Step 2: Click create folder.

Step 3: Name or Rename the new folder to "GodMode.{ED7BA470-8E54-465E-825C-99712043E01C}".

Step 4: the folder's appearance changes to look like the control panel.

Step 5: Open the folder and to reveal the list of godly shortcuts.

As of Windows Vista, each Control Panel item is given a canonical name for use in programmatically launching that item. This topic lists each Control Panel item, its canonical name, and its GUID.

Windows 7 Control Panel Canonical Names

The following canonical names are defined for Control Panel items in Windows 7. All names are also valid on Windows Vista unless specified otherwise. Not all Control Panel items are available on all varieties of Windows and some Control Panel items might appear only when appropriate hardware is detected. These canonical names do not change for different languages. They are always in English, even if the system's language is non-English.

you can make more GodeMode Folders using the "Control Panel Item.{GUID}" or any "name.{GUID}"